[general]
context=default			; Default context for incoming calls
; port 5060 already used by fritzbox, so use 5061 
; and reconfigure local sip phones (remote sip goes through asterisk!)
;                 ^^^^^
; XLITE in same subnet example config (fritzbox 192.168.222.100) 
; - System Settings / SIP Proxy / Default
;   - Enabled: Yes
;   - Display Name=Username=Auth. User=: 771
;   - Password: 771
;   - Domain/Realm: 192.168.222.100
;   - SIP Proxy: 192.168.222.100:5061
;                                ^^^^
;   - Outbound Proxy: (empty)
;   - Use Outbound Proxy: Never
;   - Send Internal IP: Always
;                       ^^^^^^
;   - Register: Default
; - Advanced System Settings / Audio / Silence Settings
;   - Transmit Silence: Yes

bindport=5061			; UDP Port to bind to (SIP standard port is 5060)
bindaddr=0.0.0.0		; IP address to bind to (0.0.0.0 binds to all)
srvlookup=yes			; Enable DNS SRV lookups on outbound calls
language=de

;using external sip provider
;and coping with dynamic ip address (the entry localnet=127...
;is required if the avm sip client is registered at localhost:5061)
;(idea taken from stefanwillmerot@ip-phone-forum.de)
;externhost=my.dynamic.host
;localnet=127.0.0.0/255.0.0.0
;nat=yes
;canreinvite=no
;localnet=192.168.179.0/255.255.255.0
;register => bluesip/username:password@bluesip.net/sip1
;...(http://www.ip-phone-forum.de/showpost.php?p=500468&postcount=12)

[771]
context=sip771
callerid="TestSIP 771" <771>
host=dynamic
domain=192.168.222.100
;nat=yes  
qualify=no                     ; X-Lite is behind a NAT router
type=friend
user=771
secret=771
;mailbox=771
;canreinvite=no                ; Typically set to NO if behind NAT

;regexten=1234                 ; When they register, create extension 1234
;username=xlite1
disallow=all
allow=gsm                     ; GSM consumes far less bandwidth than ulaw
allow=ulaw
allow=alaw

[772]
context=sip772
callerid="TestSIP 772" <772>
host=dynamic
domain=192.168.222.100
;nat=yes                       ; X-Lite is behind a NAT router
type=friend
user=772
secret=772
;mailbox=772
;canreinvite=no                ; Typically set to NO if behind NAT

;regexten=1234                 ; When they register, create extension 1234
;username=xlite1
disallow=all
allow=gsm                     ; GSM consumes far less bandwidth than ulaw
allow=ulaw
allow=alaw

[773]
context=sip773
callerid="TestSIP 773" <773>
host=dynamic
domain=192.168.222.100
;nat=yes                       ; X-Lite is behind a NAT router
type=friend
user=773
secret=773
;mailbox=773
;canreinvite=no                ; Typically set to NO if behind NAT

;regexten=1234                 ; When they register, create extension 1234
;username=xlite1
disallow=all
allow=gsm                     ; GSM consumes far less bandwidth than ulaw
allow=ulaw
allow=alaw

[774]
context=sip774
callerid="TestSIP 774" <774>
host=dynamic
domain=192.168.222.100
;nat=yes                       ; X-Lite is behind a NAT router
type=friend
user=774
secret=774
;mailbox=774
;canreinvite=no                ; Typically set to NO if behind NAT

;regexten=1234                 ; When they register, create extension 1234
;username=xlite1
disallow=all
allow=gsm                     ; GSM consumes far less bandwidth than ulaw
allow=ulaw
allow=alaw

; sip external outgoing
[sip1_out]
type=peer
;username=bluesip/username
;fromuser=username
;secret=password
;host=bluesip.net
;fromdomain=bluesip.net
insecure=port,invite
caninvite=no
canreinvite=no
nat=no
disallow=all
allow=gsm

; sip external incoming
[sip1_in]
type=peer
;fromdomain=bluesip.net
;host=bluesip.net
context=sip_in